Note:

Details

• This machine is called a Vii, it is made in China.
• It is very similar to the Wii.
• This Vii comes with Vii sports.
• The Vii is designed for children, or if you don’t like the Wii console then this is the choice for you.
  

Specification:

• Signal output :TV OUT
• Support the NTSC / PAL format
• Game Console working with the AC Voltage: CD/5.2 V INPUT/ Current:100 mA
• Remoto controller working with the AC Voltage: 2*AA alkaline batteries / Current:25 mA
• Console size:190 x 150 x 48 mm
• Remote controller size:140 x 35 x 34 mm
• There are 11 games in the unit,the screen are beautiful and sounds are living,the different feelings,handle is simply,graphics are fresh ,contents are richness,sport and body are combined perfectly.
• Weight:900g 

The structure and components of the controller:

• RF wireless function combines the body and TV screen.CPU apperceive the information and feedback to JOYPAD .Differenct sounds and joy pad has vibration function:
• 3 axes G-SENSOR to feel the track and the force of the sport;
• RF 2.4G Wireless transmitter/receiver,assign the frequency automatically,avoid 2.4G RF disturb one another.
• RF transfers real time ,transfer the data of the MEMORY library,by the deal with of the MCU,the graphics and sounds are not delayed;
• The wireless joy pad can control the screen of the TV,it can product the vibration and 10 different sounds:
• 2*AA alkaline batteries can work more than 25 hours continuous the joy pad has SLEEP function.(it maybe exist the error used by the different brand of battery.) .
• If no press any key or the motor doesn't shake ,after 15 minutes the unit will auto-power off.
• Remark:if don't plug the cartridge into the slot or plug in it wrong,there is no screen displays on the TV or display the TV or display abnormality,please plug in the cartridge again.  

Function introduction:

• Host unit:
• Power switch:press this to turn the power on and off.
• Reset switch:press this to reset your unit.
• Wireless joy pad
• Power switch:Power on the joy pad ,or awaken the joy pad when it enters the sleep mode.
• 2.4G RF: 2 Funtions
• Force to connect: When use the unit first time,you must force to connect, or during using it ,when the joy pad to connect the host unit.
• Connect method:After install the batteries in the joy pad,press 2.4G RF key,then open the host unit.the LED on the joy pad and the host unit are flashing,please wait it for about 3-4 seconds,when the LED are lighting,it shows they are connected.
• Force to cut: When the joy pad and the host unit are connect press this key ,then the joy pad and the host unit are off,the LED are flash.if the joy pad is mot to connect to another unit,aftr 15 seconds they are connect automatically.So don't press this key during play the game.

Note:

• When more than 2 units are open at the same time.if the other joy pad is pressde the 2.4G RF key,then the joy pad will connect to this unit.The primary joy pad can not workand t,you need to force them to connect again.

• Menu:press this to shows the menu to choose continue or exit the game.

• Holding method:

• The following figure shows a recommended method of holding the joy pad.

• Tie the wrist strap attached to your wrist

• Adjust the position of the adjuster on the wrist strap to the correct position.

There is 18 games included with the Vii: - 7 in one card games and 11 included with the Vii Console

7 in 1 game card with 7 games for you

11Games list:(11 games are included in the vii game console)