MWG05 is based on direct digital synthesis (DDS) signal generator, the use of CPLD design, with easy to use, high signal stability, while a TTL signal output, the output signal to adjust the amplitude and DC offset, while the instrument has a sweep function, were able to set the sweep frequency range and scan time. For laboratory technicians and enthusiasts Main technical data signal output Output sine wave, square wave (variable duty cycle), triangle wave, sawtooth Output amplitude ≥ 9Vp-p (no load) Output Impedance 50Ω ± 10% ± 2.5V DC bias Display LCD1602 Frequency range 1Hz ~ 5MHz Frequency Resolution 1Hz Frequency stability ± 1 × 10-6 Frequency Accuracy ± 5 × 10-6 Sine Wave Distortion ≤ 0.8% (reference frequency 1kHz) Triangle wave linearity ≥ 98% (1Hz ~ 10kHz) Square wave rise and fall time ≤ 100ns Square wave duty cycle range from 1% to 99% TTL output Frequency range 1Hz ~ 5MHz Rate> 3Vp-p Fan-out factor of> 20 TTL load SWEEP scanning Sweep range of Fs to Fe Sweep Time Range 1 ~ 99 second Output amplitude 0.5Vp-p ~ 20Vp-p
Trixy to install the application with Win7 (or XP). You must copy dll-files manually.
Sweep is 1 sek per step! When sweeping 20-20.000 (1Hz res) it will take 5 min!!
From inside the application you can only set freq 1 - 9.999Hz (!) but with the onboard-buttons it is possible to set up to 5Mhz.