Copyright Violation Instructions
Please note：
When you choose pictures that need to be customized, you must ensure not to violate any copyrighs. If, after the completion of the customization, any copyright infringement problems should occur, we cannot be held responsible for those. Please make sure you agree to our Terms and Conditions. If you do not have any further questions you can click OK to continue shopping. Thanks again for choosing to shop with us.
Please make sure you agree to our Terms and Conditions.
Photos
Instruction:
The product is passive infrared detector with high stability. It has adopted advanced technology in signal processing and provided superhigh detection ability and antii error alarm. The detector will detect movement of human automatically when intruder passes through the detection area, and it will send out alarm signal to alarm host if there is movement. The product is suitable for the safety of residential house, villas, factories, marekts, warehouses, office building etc.
12V +: DC12V Positive
12V - : DC Negative
Alarm: Alarm Relay Output Port
Temper: Anti-Temper Output
Note: 1. it is Wiring Ceiling Mounted PIR Motion Detector, not wireless type. User must connect it to wired alarm control panel or other wired equipments via wiring connection.
2. Before buy, please make sure you are a proffessional wired detector buyer, who can understand the wiring terminals and know how to connect it to your wired equiments in order to avoiding wrong item ordered.
3. Please cover the top cover during test.
1. Jumper optional for alarm delay 5 seconds/30 seconds
Insert the jumper: Alarm delay about 30 seconds(default)
Without jumper: Alarm delay about 5 seconds
2. The jumper for detection sensitivity: 1P/2P
Insert the jumper: Choose 1P, high sensitivity (default)
Without jumper: Choose 2P, low sensitivity
3. Normal closed (NC) and normal open (NO) Adjustable
Insert the jumper: Normal Closed (Default)
Without jumper: Normal Open
4. Jumper for controlling LED indicator
Insert the jumper: LED on when triggered(default)
Without jumper: LED off when triggered
5. Detection Distance adjustable
The jumper for detection distance:
5M: detection distance is about 5M
6M: detection distance is about 6M
7M: detection distance is about 7M
Specification: Working voltage: DC9V to 12V Consumption current: less than 20mA Low Pressure failure: Less than DC8.5V Working temperature: -10 to +50 Centi Degree Installation way: Ceiling Mounted Appreance Size: 106 x 36mm Self-test time (Self Warm-up): about 60s LED indicator: red Alarm output: N.O/N.C optional; Connection capacity: DC12V, 300mA Anti-tamper switch: N.C without relay output ; Connection capacity: DC12V, 300mA
Item Added Successfully