How to Program: 

1.Press the keys A and B at the same time until the LED quickly flashes 3 times;now holding pressed the A,press 3 times the B until the LED flashes three times, then release both keys.Now the new remote is ready to copy the code.

2.Take your original remote in the left hand and our duplicator in your right, put them close to each other; press key-A of both remote contro ls until LED on our duplicator keeps flashing; release the keys.( the left keys follow the same above operation)

3.Press both keys C and D until the LED flashes simultaneously; release

the keys.(A2-key duplicator dose not have this function)

Notice:

The essential condition for the selection of the remote control;the copyed remote control operates normal,chip is compatible and frequency is correct.

Before buying,please make sure the copyed remote control operating frequency or choose & buy the frequency adjustable type remote control.

Before buying,please confirm whether your remote control can be copyed or not.

Our remote control can copy the fixed codes and learning codes 

rather than stealth codes.It can't copy original car remote control, two-way remote control and rolling code 

remote control (Rolling code chips start with HCS commonly,such as HCS200,HCS201,HCS300,HCS301,etc