|English Français Español Deutsch Italiano Português 日本語 Русский Nederlands العربية Norsk Dansk Svenska 한국어 Suomi עברית Türkçe Polski Čeština Ελληνικά Hrvatski Română Magyar|
|Remote Controller Battery||4×AA,|
|Built-in Camera||With HD Camera,|
|Battery for Body||7.4V 500mAh,|
|Remote Control Distance (m)||300,|
|Flight time (min)||8,|
|Net Dimensions (cm)||33*33*11.5,|
|Shipping Weight (kg)||1.1,|
|Function||Headless Mode, One Key To Auto-Return,|
|What's in the box||Blades, Remote Controller / Transmmitter, RC Quadcopter, Screwdriver, User Manual,|
Mode 1: It means "Right Throttle Hand". It is also be called Japenese Hand. The throttle button will be on the Right side of the transmmitter and the direction control button will be on the left.
Mode 2: It means “Left Throttle Hand”. It is also be called American Hand. The throttle will be on the left of the transmmitter and the direction control button will be on the right.
If there is no special explanation, the transmitter will be "Mode 2"
2. Check whether the blades are installed correctly.
2. Remove the blade that does not spin to see if the motor is working properly;
3. If the motor does not work, check whether the motor gear is connected properly;
4. Remove the body shell, check if the motor cable is connected to the mainboard appropriately.
2. The quadcopter is not bind to the transmitter correctly, please refer to the user manual to re-modulate the frequency.
2. Adjust the trim key ;
3. Re-modulate the frequency, the quadcopter must be put on a flat ground;
4. Re-calibrate gyroscope.
2. Battery power is insufficient, please full charge the battery, or replace with a full charge battery.
Thank you for submitting this report We will process as soon as possible