Copyright Violation Instructions
Please note：
When you choose pictures that need to be customized, you must ensure not to violate any copyrighs. If, after the completion of the customization, any copyright infringement problems should occur, we cannot be held responsible for those. Please make sure you agree to our Terms and Conditions. If you do not have any further questions you can click OK to continue shopping. Thanks again for choosing to shop with us.
Please make sure you agree to our Terms and Conditions.
Photos
Application range: This product is typically applied to the multi-channel electric doors and windows, ordinary electronic lock, switch, electric garage door, window, hoisting equipment ,industrial automation and control, all kinds of anti-theft alarm ,security and other fields .The remote controller supports the use of forming a complete set of wireless intelligent remote control system .It has a wide range of uses.
Second, learning, clearing methods and steps 1. Key function: The two buttons on the controller are LEARNING and mode switching buttons (MODEL) respectively. 2. Learning methods: Press the learning button once, the indicator light flashes (into the learning state), press any key on the remote control, the indicator light flashes three times, indicating that the first relay is learning successfully; press the learning key twice, repeat the above steps to learn the second relay; 3. Switching the working mode: (All relays are off, you can turn off the power and re-power on during the operation) Jog: Press the mode switch button, the indicator light flashes once and then goes out, indicating that the jog setting is successful. Interlock: Press the button to switch between the two modes; the indicator light flashes twice and then goes out, indicating that the interlock setting is successful. Self-locking: Press the button in the three-time mode to switch; the indicator light flashes three times and then goes out, indicating that the self-locking setting is successful. Delay 5 seconds: Press the button in the four-time mode switch; the indicator light flashes four times and then goes out, indicating that the delay setting is successful. 4. Clear code: Press and hold the learning button until the indicator light is on.
Parameters: 1,working voltage:DC12V-50V 2,Quiescent: 10mA 3,Working Current:30mA-90mA 4,Working Temp: -20-80 5,Working frequency : 433mhz 6,Size: 68-48-20mm
Item Added Successfully